Brultech Greeneye Monitor Manual de usuario descargar pdf (Pagina 8)

3. Default Cost – Enter the default cost per KWh. This value will be used if the electric rate cannot

be determined.

4. Site Type – Select SmartEnergyGroup if you want to post updates to the Smart Energy Groups

web site. You’ll need to complete the setup on http://smartenergygroups.com before enabling

this option.

5. Send Interval – Select how often you want to post data to the SmartEnergyGroup web site.

6. URL Address – Enter the URL for the SmartEnergyGroup web site. The default value is

http://api.smartenergygroups.com/sites/

7. Token – Enter the token you received when you signed up on the SmartEnergyGroup web site.

8. Authorized User Roles – Specify the HomeSeer uses authorized to access the UltraECM3 web

page.

9. Unit Type – The format used to display temperatures from the 1-wire sensors. The default

format is U.S customary units.

10. Display Degree Units – If set to Yes, a degree icon will be displayed on the HomeSeer status web

page.

11. GreenEye Serial Baud Rate – Select the default serial connection baud rate.

12. ECM-1240 Serial Baud Rate – Select the default serial connection baud rate.

13. Register Link – If set to Yes, the UltraECM3 button will be displayed on all web pages.

14. Debug Mode – If set to Yes, the plug-in will write verbose logging to the HomeSeer log file.

Brultech Devices

The Devices web page allows you to add, modify and delete the Brultech Energy Consumption Monitors

you have installed in your home. A Brultech Device entry contains the serial number, name, type,

connection type and connection address.

Adding a New Brultech Device

1. Click on the UltraECM3 > Devices button.

2. Enter the Brultech ECM serial number.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Brultech Greeneye Monitor Manual de usuario Pagina 8